![]() ![]() If you’ve followed all of the instructions, you’ll be good to go! Repeat Step 1 once or twice a week to keep the top of the keys clean and sanitary. Once everything is dry, put the keys on one by one going from left to right, so you remember the exact order that they go in!ĭouble-check that everything is 100% dry, then plug your keyboard back into your PC or put the battery back in your laptop and turn it on again. Don’t hold the can too close to the surface, or it might leave a frozen residue.Īfter blowing out the dust, take your alcohol-dipped brush or cotton swab and gently swab over all of the nooks and crannies. Step 4- Clean Under The Keysīefore putting your keys back on, you’ll want to take advantage that they’re off and clean the board under your keys.įirst, blow the entire area out with your compressed air to get rid of any crumbs or dust. Cleaning electronics with alcohol and a microfiber cloth works well for the cover, case, buttons and keyboard, but not on metal or touchscreen surfaces. When they’re clean, set them back in their position on a clean surface. Once you’ve removed the keys, dip a small toothbrush in the alcohol, and scrub the underside of them to remove any extra dirt and debris. You can get similar results using a 50-50 mixture of tap water and isopropyl alcohol, available for a fraction of the cost. ![]() ![]() Nothing’s worse than misplacing keys and continuously pressing the wrong button (trust me on this). Just don’t put so much pressure that you damage it.Īs you remove the keys, set them on a clean surface in the same exact order they are on the keyboard. Safe and Alcohol-Free For best results, spray cleaner onto microfiber cloth, gently wipe then quickly dry any excess liquid from LCD surface. However, most keys can be removed by using a plastic wedge such as a trim removal tool or a small flathead screwdriver. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |